Gaggia 14101 Classic Espresso Machine

When I got my Gaggia more than several decades ago, it was not yet called a Classic. It was called a Coffee Gaggia. About 20 years ago, some minor changes were made, and the unit was renamed Classic. The new "Coffee Gaggia" is not the same as this machine.

This machine has a robust build, and high quality parts. Its tank heats the water quickly, and to a proper temperature, and the pump is powerful enough to do the job properly. I would strongly recommend using filtered water, especially with a low mineral content, so that deposits do not build up in the tank.

My version has an all metal frothing wand, which does as good a job as the skills of the operator will allow for. The newer versions have a "turbo frother," and an optional milk frother that will take the guess work out of frothing and place foamed milk directly into the cup. I can't comment on these newer features, but perhaps they will allow a better job to be done by those with less experience.

The newer models are brushed stainless, while the original models had an appliance enamel finish. Since the old finish allowed water to penetrate under any scratches or imperfections in the finish, this was a particular problem near the portafilter holder and underneath the drip tray. The new version should retain its finish far longer, although the old one still does not show any wear in places that are visible with the machine assembled.

Minor differences are that the new machine has a more robust looking steam knob that was moved to the side, and the thermostat light, which indicated that the unit was heating, has been replaced with a "ready" light that is integrated into the coffee switch and signals the opposite.

In the time that I've had my machine, I've had only minor problems with it. My steam thermostat needed to be replaced once, and the light on my power switch stopped working. These were larger issues before the Internet made it easy to find parts, as these items are hard to find locally. The other problem is that if the unit is not used for extended periods, and the tank is allowed to dry out completely, and the water used was hard, then some parts are subject to clogging. The troubleshooting steps in the manual are not helpful for these sorts of problems. The machine can be disassembled for cleaning by somebody who is mechanically inclined, but unless you feel comfortable with appliance repair, you are better off avoiding the situation by using filtered water, and/or descaling regularly, especially before any long term storage.

The other "parts" issue is that the gasket for the filter basket should be considered a consumable part, and should be sold by every dealer as an accessory, rather than just by repair facilities. The machine really should have included an extra one since this is the only part that will definitely wear out with regular use. It might take a few years or longer, and is easy to replace, but it will wear out.

Overall, this is a well built machine that should last you many decades. Although it seemed expensive when I bought it, it has averaged out to about 6 cents a day to own it, which was well worth the price, and I'll probably get another few decades out of it.

If you have used cheaper espresso makers, you will appreciate the robustness and quality of this unit. Features such as the three way solenoid controlled valve might be transparent to the user, but the lack of them become clear when you use a cheaper machine. This one just keeps going and going.

Save 33% Off